- #NETWORX KEYPAD MANUAL INSTALL#
- #NETWORX KEYPAD MANUAL MANUAL#
- #NETWORX KEYPAD MANUAL CODE#
- #NETWORX KEYPAD MANUAL PROFESSIONAL#
#NETWORX KEYPAD MANUAL CODE#
If a code is entered followed by the key while this light is flashing, all abortable reports will stop the communication process. The cancel light will flash during an abort delay time. If the bypass light is “off”, no zones are bypassed. The zone(s) that is bypassed will also be illuminated. The bypass light is “on” when any zone in this keypad’s partition is bypassed. The armed light will flash when there has been an alarm during the previous arm cycle. The armed light is “off” when it is disarmed. The armed light is “on” when the system is armed. key on the keypad control (for ARMING only)Ī four- (4) or six- (6) digit entry code used to arm or Security system by pressing either the or To enter/exit the building without an alarm, or beforeĪ master arm/disarm code that can program otherĪ system divided into multiple areas in which its ownĪn option that allows you to turn on (ARM) the (Note: Those zones that are not ready will notĪ Function Code is either a four- (4) or six- (6) digitĬode that has been programmed by the installer toĪn option that allows the user to bypass multipleĪn option that allows an instant alarm condition forĮntry/Exit doors, or grants a delay to allow someone That is ready to be “force armed” will flash the ready NOTE: A system may have eitherĩ9 four-digit codes or 66 six-digit codes, but not aĪn option that allows a special code to be sent to theĬentral station that indicates the alarm system isĪn option that allows the system to be turned on The location where alarm data is sent during anĪn option that allows the keypad to sound a ding-ĭong whenever an entry/exit door is opened.Ĭan be either User Codes (relating to a person) orįunction Codes (a toggle switch to turn specificįunctions on/off). The level of access an individual has when using an Īn option that allows a delay in reporting to the ĭISARMING THE SYSTEM.ĬANCEL / ABORT FEATURE (Optional, see page 1). USING THE QUICK ARM (Optional, see page 1).ĬHANGING MODES WHILE SYSTEM IS ARMED. ĪRMING YOUR SYSTEM IN THE “AWAY” MODE.ĪRMING YOUR SYSTEM IN THE “STAY” MODE. ĪRMED LIGHT.īYPASS LIGHT.ĬANCEL LIGHT.ĬHIME LIGHT. Please read the following information and instructions carefully before operating your security control system. Your periodic test should be done with AC Power removed to verify the battery is connected and adequately charged.Ĭare should be taken to plug in and restrain the AC Transformer after testing. It may be possible to arm the security system without the backup battery connected.
#NETWORX KEYPAD MANUAL INSTALL#
Use qualified security professionals to install and maintain your security system. Smoke and heat detectors may not detect heat and smoke in all situations. Warning devices will need to be loud enough, wired correctly, and properly placed to provide notification of an alarm event. Do not rely on it as your single source of security. Your security system is an electronic device and is subject to failure or malfunction. You should be aware of the following facts when preparing a safety/security plan for your home/business. The knowledge you have of the security system and how that knowledge is utilized in a weekly test of the complete system. The quantity, quality and placement of security devices attached to this system.Ģ. Keep in mind, the level of security you will obtain with this system relates specifically with two major factors:ġ. Understanding what the lights and sounds mean will help you to easily operate your system. These provide specific information relating to the status of the security system which is described in the booklet. The LED keypad includes up to 35 lights and a built-in electronic sounder. The system must always be disarmed using a 4 or 6 digit code.
If your Security Control has been so programmed, you may be able to turn on (ARM) your System by simply pressing the or key. The SECURITY CONTROL can be turned on (ARMED) and off (DISARMED) by entering a 4 or 6 digit code into the Keypad Control, which is similar to a telephone keypad.
#NETWORX KEYPAD MANUAL MANUAL#
IF YOU DO NOT UNDERSTAND ANY PART OF THIS MANUAL YOU SHOULD NOTIFY YOUR INSTALLING COMPANY SHOWN ON PAGE 1. THIS BOOKLET SHOULD BE KEPT IN AN ACCESSIBLE LOCATION FOR THE LIFE OF THE SECURITY SYSTEM. FAILURE TO DO SO COULD RESULT IN THE SECURITY SYSTEM NOT WORKING PROPERLY.
#NETWORX KEYPAD MANUAL PROFESSIONAL#
ALL USERS OF YOUR SECURITY SYSTEM SHOULD READ AND FOLLOW THE INSTRUCTIONS AND PRECAUTIONS IN THIS BOOKLET AND, IF POSSIBLE, PRACTICE ON THE KEYPAD CONTROL WHILE YOUR PROFESSIONAL INSTALLER IS ON SITE. THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTAND YOUR SECURITY SYSTEM AND BECOME PROFICIENT IN ITS OPERATION. Installing/Service Company _įor Service Call _Ĭentral Station _ĮMERGENCY ACTIVATION KEYS (check if enabled)
0 kommentar(er)
